Posted 5/8/2023 07:57 (#10220584 - in reply to #10220072) Subject: RE: Ag Leader Isobus liquid install on a Hagie sts12 2016 Sprayer
Make sure that anything to do with the JD rate control system is removed. In the right-hand console, there is another module that is added because the Deere system required it. I believe it is an MC2 that is mounted to the steering controller plate. You will also need to make sure that the 3-pin connector right below the section switches has a terminator on it. Again, when the Deere system is added, that is where they connect into the Hagie CAN.
Ag Leader Isobus liquid install on a Hagie sts12 2016 Sprayer
