AgTalk Home
AgTalk Home
Search Forums | Classifieds (31) | Skins | Language
You are logged in as a guest. ( logon | register )

Setting up a home base station - SNIP??
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
mx270a
Posted 3/10/2023 19:10 (#10133291 - in reply to #10133125)
Subject: RE: Setting up a home base station - SNIP??



Cedar Rapids, Iowa
The FlexPak6 does have Ethernet, it's in the 15 pin I/O port. It uses 4 pins in that port, so an adapter is required to get to a RJ45 jack.

The commands to push correction data to a caster would look something like this:
INTERFACEMODE NCOM1 NOVATEL RTCMV3 OFF
UNLOGALL NCOM1
LOG NCOM1 RTCM1004 ONTIME 1
LOG NCOM1 RTCM1012 ONTIME 1
LOG NCOM1 RTCM1006 ONTIME 10
LOG NCOM1 RTCM1033 ONTIME 10
LOG NCOM1 RTCM1019 ONTIME 120
LOG NCOM1 RTCM1020 ONTIME 120
NTRIPCONFIG NCOM1 SERVER V1 192.168.2.3:2101 LOCAL "" 1234


RTK2GO is a nice solution if you don't want to have to maintain a caster. So what if someone else uses the data.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)