|
| Drain trans. to the bottom of the top hole. Let it drain for 2 hours in a level spot. Cap off the two small lines going to the pto valve. Run the tractor for several hours. Motion the tractor in the same level spot. Check oil. If very much oil comes out, then the PTO unit needs new seals. Don't forget the pump seal. I worked on white for 30 years and I did not find very many holes in the pan.
I made a mistake on the test I mentioned. If the oil comes out, then it is the pump seal or a cracked pan
Edited by shopmanbob 12/1/2022 12:40
| |
|