AgTalk Home
AgTalk Home
Search Forums | Classifieds (60) | Skins | Language
You are logged in as a guest. ( logon | register )

JD 350 to using a 2630 and row clutches on planter
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
cyclones30
Posted 11/16/2022 07:56 (#9934452 - in reply to #9933877)
Subject: RE: JD 350 to using a 2630 and row clutches on planter



Midwest

BroadviewAg - 11/15/2022 20:18 Super easy conversion. Ag express can sell you harnessing to simplify it a little but all you'll need is a wedgebox, harnessing from that and epm module. The 37 pin harness already on it will plug into the seedstar conversion harness which will also tie in the epm's. Sounds complicated but its a very easy swap. A better upgrade would be keep the ct harnessing, convert it to a 20/20 and add rowflow for clutching. Much much better setup and the information you'll gain going to a 20/20 is well worth it and honestly probably cheaper in the end


I was thinking that but Ag Leader. Use the existing sensors and wiring harness and could use Ag Leader clutches and module or the JD factory clutches. 

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)