Washington, Kansas & Lincoln, Nebraska | no that is not normal engaged voltage. You should have battery voltage at these solenoids when engaged.
Any troubleshooting flow chart for this tractor will ask if there are fault codes. If the answer is yes, it will ask you to diagnose and repair the fault codes before attempting any further solution. There are flow charts in the electrical section of the service manual that give step by step proceedures on diagnostics for each specific fault code. In your case, you need these flow charts to have much of a chance at a solution to your problem.
I was hoping maybe you were closer. Marion county is most of, if not all of 100 miles from here. |
Ford 8970 ptp no working
