|
| Hi guys
I’m running a Incommand 800 firmware 7.0 with a 6500 RTK unlocked receiver as well as a ontrac 3. I’m trying to take advantage of this technology by going round on atv setting straight AB lines off of each fence in each paddock.
I’m unsure what the best way to do this is but I’m doing it by going to general guidance and setting 1 metre guidance width and 1 metre implement. Then setting AB lines off of each fence in said paddock followed by saving the 4 lines as a group.
Now in theory when I go to the paddock regardless of which implement I have on, I should be able to load that group of guidance lines and on the next screen it should calculate how many metres to shift them by to suit the implement width. Now for some reason it is not doing this but yet it works if I load any of those guidance lines as a individual line opposed to as a group.
Thanks in advance for any help on this topic! | |
|
Ag Leader - Setting RTK guidance lines
