|
Central KS | Make GOOD measurements for the profile and that's a good starting point at default values. Then what I like to do to dial it in is drive a couple hundred feet with it planting in the ground to make reference marks and a map. Then plant perpendicular to the line with the planter just above the ground but tricked into being in the ground so that it drops seed on the surface. This avoids having to dig! Drive clear across the planted line so you can get on and off times in the same pass. Then you can adjust numbers as you need. If you want turn off/on time to be quicker, raise that number. It's about 9 inches per 0.1 seconds. | |
|