AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

magnum fuel tank
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
Posted 10/14/2021 08:02 (#9268188 - in reply to #9268095)
Subject: RE: magnum fuel tank

Southeast Nebraska
Not sure where your crack is or how hard to get at it it is but a lot of those have been welded. And if you can find another Case IH tank that's been scrapped to use its plastic as a patch have an identical plastic really helps in the process. I also know of several that have been patched with Polly and sheet metal screws and silicone sealer and have been holding that way for a long time. Use your heat gun to form the poly to fit if you can't find a piece that fits. Of course drill slightly oversized hole in the patch piece so the threads on the sheet metal screw bind things together better. Use a lot of screws and not just on the edges. Good luck!

Edited by nebfarmer 10/14/2021 08:03
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)