|
Clifton Kansas | Reichardt has a green fit system that allows green star to work on other brands but don't know if it works the other direction.
As for have 2 different monitors steer. We put a switch in our combine to switch between Reichardt row steering and Agleader RTK (which is used for everything else).
We used a 2 sided on off on switch to connect the middle wires to either front or back wires.
On the Gleaner S78 it ran direct to the steering valve.
On the S97 it goes to the 2 can wires.
We use Gleaner monitor ISO to control the Reichardt system. We could feed Agleader GPS in to it t haven't done that.
We like having the Agleader lines made at planting so we can find the correct 12 rows to pike in the middle of the field.
The monitor that you were using beep at you when you flip the switch. Clear it and everything works OK.
Don't know if this helps.
Edited by farmerwalt 10/13/2021 09:00
| |
|
Agleader receiver into JD steering?
