AgTalk Home
AgTalk Home
Search Forums | Classifieds (41) | Skins | Language
You are logged in as a guest. ( logon | register )

Case GPS- 372/Pro 700 Issues
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
arl53607
Posted 10/5/2021 11:03 (#9253940)
Subject: Case GPS- 372/Pro 700 Issues


I have a case combine running a pro 700 running the combine with a 372 receiver. I have an external 3rd party monitor with fieldview that is spliced into the nav controller. For some reason my location is incorrect (latitude is correct longitude is incorrect) on the 3rd party monitor/ pro 700 and fieldview and after switching case receivers nothing changed. I then switched to a different brand receiver and bypassed the case system and did finally correct my gps location. It's basically narrowed down to the pro 700 or nav controller but does anyone have any suggestions or ran into anything similar other than checking the combine offsets? Given the timing and availability of parts, its rather challenging to switch out receivers and would have to run two receivers on the combine at this point to fix the problem.

Thanks in advance.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)