|
North Dakota | I'm surprised you didn't have lots of faults as the 2388 and flagship take different software. The 700 will plug in (same 26 pin connector) but will need some kind of a mount and flagship software. There is a kit from Case to add an arm to mount the 700.
The bigger problem is the YMIU off line. Check ALL your fuses as I have found an unrelated fuse causing problems. Mice like to chew on the wires on the top of the clean grain elevator.
WAIT A MINUTE! Flagship combines above serial number HAJ202001 doesnt have a ymiu. It is can based. Hit the back button the toolbox and find the tab on the bottom that says yield, change the sensor type box from YMIU to Can Based. | |
|