|
Victoria Australia | The xtrac error comes on the screen as a fault then will not allow the tractor to engage the guidance line.When in the 20deg swath veiw the monitor seems to pick up swath lines that are at 90deg to the swath lines that we should be following .We will be driving the swath line exactly and this fault message comes up but it doesnt do it all the time ,we have done 200hrs with the tractor withthis problem happening six times a day(we wouild have to reboot the Pro 600to fix it up) since we have only been using the 90 deg veiw another 100hrs and it has not missed a beat.I should have mentioned before but this is in the field swath not sure if the same error message come up if i was to use just a straight A B swath.
Torn the tractor is not close to give you a version number just at this piont in time but can get back to you later with this info.
Thanks | |
|
Pro 600 Xtrac error
