|
Alberta, Canada | The air velocities show up in the cart page in the VT screen, but the flow sensors (optical sensors on the hoses on the air seeder to detect blockage) show up in a separate page in the VT. If one of them stops detecting flow (meaning the hose may be plugged) a warning pops up in the VT, regardless of what screen I'm on. But, to find out which sensor is reading no flow (there's 16 sensors on the drill), I have to scroll over to the flow monitor page.
I could be wrong, but for the backlight, I think you can set two brightness settings - one when the tractor lights are off, and another when they're on. Whenever I turn on the tractor lights, it looks like the display automatically dims. | |
|
Intelliview II Plus (Pro 600) Question
