South central MN | ChadB - 1/17/2022 16:36
Just ISOBUS and Power? I have a cable in my office you could probably copy. It's designed to tee-in at the ISOBUS 4-pin DT extension behind the right cover panel of the Challenger along the floor with a 3-wire connection for power/switched power/ground.
It'll get your Pro 700 on the tractor's physical ISOBUS, which is tied to the IBBC connector in the back. You'll likely have to disable/adjust some ISOBUS functions in the factory armrest display (C1000) so they "play nice".
Shoot me an email if you are interested in more details.
Close. I will be steering it with the Pro 700 and running my planter with it also. I would need harnessing from my NAV controller and reciever, and isobus. I also need to diagnostic connector on the harness for planter diagnostics. I think I’m just going to have to put but the all makes guidance harness in and my planter harness and just plug in what I need. |
Challenger ISO to Pro 700
