AgTalk Home
AgTalk Home
Search Forums | Classifieds (14) | Skins | Language
You are logged in as a guest. ( logon | register )

Challenger ISO to Pro 700
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
starbuck
Posted 1/18/2022 16:32 (#9447756 - in reply to #9446615)
Subject: RE: Challenger ISO to Pro 700


Idaho
Steering is easy part, go look at a Trimble cabling guide( a link has been posted here in precision no long ago) it will show you the cables from the nav to the tractor can bus, that part should be the same Trimble or pro 700. it's just a simple y connect plugin under the fuses , however the can to the steering and the iso on the back appear to be totally separated. I was wanting to do the same as you about a year ago ,that is run both steering and iso on the same screen in my case I was going to use a tmx, the best I could come up with was called a iso cab cabling kit ( also shown in the cabling guides) that supposedly plugs in to iso on a tractor somewhere. and no one could ever tell me if it was compatible with what tractors. Hope this helps any .

Edited by starbuck 1/18/2022 16:38
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)