central iowa | scoot - 1/8/2022 00:39
I have a Crary air bar that was on my 925 platform. The combine was a 9500 and the fan was separator drive off the combine. Now I have a 9570 combine and will use a 625f platform. I can mount the bar to the head, but need a header drive system for the fan. I can buy new from AWS, but thought I would check the used market. Thanks.
I know the fan system is not cheap, but unless you can find one of the newest systems If i were you I would go with the new one. They changed their chassis last year and now bearing and belt changes are SOOOO much easier than before. Not that finding a used one would be impossible, but you would need to make sure the fan came from a combine with the proper rpm setting for your new one as the fans are geared for the combine and changing the speeds is usually cost prohibitive.
Then new chassis is not terribly expensive to change to should you get a heck of a deal on a used one, but that probably isn’t too likely. Good luck tho.
|