|
Idaho | Thanks for the pic, here what I would look into.
First the part I know, ask your case dealer about getting a trutracker unlock and hardware
Cas Ztn68039-12 kit $8365.00
Cas Ztn69537 software $845.00
The software is a the unlock for the fm1000 that I assume you have in that tractor it builds on the truguide unlocks you now have. The prices above is what I paid in sept .
This particular kit includes a load sensing valve ( three lines rather than two) that will match up better with your tractor hydraulics.
Not all dealers know about this kit. Some do.
Then investigate something like a pro trakker hitch , also sunco makes a hitch too. Anyway basically a aftermarket swinging drawbar that will then steer the dmi. Or maybe hinge the dmi hitch it's self. All tracker need is a ram and a place to put a sensor to monitor the length of the ram.
I'm my case I had steerable wheels on the back of a harvester so I just activated them. The next system I would like to setup and try will be be a three point mounted strip till bar but I don't have a Accra track quick hitch yet.
Another thing I just thought about would be to add 2 or 4 sunco stabilizers to the back bar of the Dmi because you mentioned it wonders around , that would help nail the thing down .
Edited by starbuck 11/27/2021 14:26
| |
|
Trimble TruGuide issues
