|
Southeast MN | While messing with camera setup, I was also working on grain cart lighting and replaced a fuse. Also 'borrowed' relay #5 to address an intermittent HVAC controller issue.
I swapped the two relays, thinking 5 was not used since it was marked 'blank' on the relay diagram and put the glitchy HVAC relay back into spot 5. A call to the dealer service manager this morning and he found info online stating relay 5 is NOT blank and will throw code 19742 when not installed.
Shout out to Kalmes Implement in Altura! | |
|
2013 Case mini-magnum 190 fault code 19742
