|
| Done test with a air hose in shop with plastic inner lining using it for a fuel line from fuel tank to fuel pump on frame rail. The old 7.3 fired off run fine hit the road for the real test and it's stroking like it's supposed to. Now the fun part of getting the fuel tank down or lifting the steel bed. The fuel tank (which is metal ) is located in the rear of truck. At the moment since loader down and what I have available to work with I think dropping the tank may be best. However may be best to lift steel bed which could arrange to get lifted if needed.
#1 What's the opinions from NAT experience doing this?
#2. What am I looking to replace now a line filter in tank, sock, screen etc?
#3 Anyone got any fuel tank diagrams of assembly parts I'm having to locate and remove from tank?
#4 Tips on best way to go about taking tank down so I do not do any damage to lines and wire harness connected to tank?
TIA for advice and tips on this process
Edited by DeutzTractorMan 7/22/2021 22:29
| |
|
7.3 diesel Ford Powerstroke
