Posted 4/15/2021 13:05 (#8953338 - in reply to #8937650) Subject: RE: JD 6000 no gps signal
Galchutt, ND
I did find the can wires were broken where they come out the back of the cab. Fixed those and have signal but when I go to engage the autosteer it says no "no tcm corrections" and won't engage. I can calibrate the TCM and it will read the roll, pitch and yaw.
I went into the addresses and couldn't find address 180 under the grc.001
JD 6000 no gps signal
