|
Lincoln County. NC | The genuine Woods blade bar puller is a box beam as long as the blade bar with two U shaped straps at the ends secured with the blade bolts. An Acme screw in the middle pushes against the end of the shaft (with a bolt screwed in the tapped hole). Sadly even with the puller available to use I have seen more than one blade bar cut off in pieces.
I found an image.
Edited by RickB 6/30/2020 18:18
 (1A55D611-3D5D-4933-B39E-430A90394E70 (full).png)
Attachments
----------------
 1A55D611-3D5D-4933-B39E-430A90394E70 (full).png (66KB - 765 downloads)
| |
|
How to get my mower apart
