Near Intersection of I-35 & I-90 Southern Mn. | EZ-Boom was designed to replace a Raven 440/450 that have a built in Master and Section switches. A 460 might work. An old test is to borrow a 440/450 from someone and install it in place of the 460. If you are able to control the sections using the 440/450 with its built in switches then EZ-Boom will work. This might require that the switches you have been using are in the OFF position. If not some rewiring may be necessary.
EZ-Boom must be incharge of running the boom sections and no other switches can intervene. This is so EZ-Boom can operate auto section control as it sees fit.
Edited by tedbear 4/6/2020 17:21
|
Raven 460 to ezboom
