|
Fancy prairie, Illinois | Local truck dealer that used to sell gm HD didn't have a cable, and neither did cat dealership, but the guy at the cat dealership also said theres a 9 pin Deutsch so I'm not too sure about his information.
The hand primer acted normally, firm to push in, the fuel transfer pump was actually replaced about 6 months ago. Pumps plenty of fuel out of the plug on filter housing
I ran it on ether for a few seconds more than enough to purge any air in fuel or oil.
I haven't pulled valve cover yet.
I'll check out the wiring on the timing sensors more closely tomorrow.
In my tests today I checked solely with a meter, I'll wire up a light tomorrow. | |
|
Cat 3126 no start problem
