Yorketown, South Australia. | Another possibility could be upgrading to RTK with a mojoRTK. Initial cost may be higher but the better accuracy, advanced tilt compensation, no ongoing correction fees and virtual wrench, make it worth considering.
Assuming you are using a GP Steer interface (blue box) between Rinex screen and hyd. valve, I think Leica are working on a Steer Ready Kit to suit. This may include fitting a steer angle sensor, but tilt compensation would be handled by the mojo console. You would need to check with Leica if the SRK for the GP Steer is ready yet.
A NMEA data output cable could connect your existing Rinex screen for mapping, virtual road, autospray if required.
Total cost would be up around Aus$25,000- exc GST. |