Near Intersection of I-35 & I-90 Southern Mn. | I would recommend setting the boom width for section 3 to zero. That way if it gets turned on, It won't affect the acre and rate computations. If this had happened your total field acres should have been long. If you have done this in the past with boom 3 equal to the widths of boom 1 and boom 2 and boom 3 switch On, you should have had problems.
There is no schematic inside the 440. The diodes will visually appear to be damaged. It is a bit tricky to replace them if you don't have experience. |
Raven 440 and NH3 gremlins
