|
Ohio | The vaporizer kit came with a new plunger/plug that is spring loaded and this piece is connected to the push button that sticks thru the housing . Boy is that confusing ! The push button is connected visa a small piece of metal that pivots when the button is pressed . this pivoting of the small bracket moves the plunger/plug away from the housing . This plunger had a specific height it was to be set at according to the instructions in the rebuild kit . I reset/bent the bracket to accomplish the setting that was asked for . The original setting was no where near where I ended up according to the instructions . What I do know is when cranking the engine over the button pulses in and out . I'm wondering if someone that knowed what they were doing , had set this plunger at a different height , than what the instructions said . Does any of this make sense ? The part I don't understand is that a shot of either has no impact at all . | |
|
Propane forklift won't start--imagine that .
