|
central Ontario | Some things to try-
1- make sure you havent tripped the excess flow valve on the tank valve
2- are you getting liquid to the vapourizor- crack the liquid hose at the vapourizor to check.
3- is the vapourizor frosted up?-if not then pouring hot water wont help
4If you're getting liquid to the vapourizor take the vapour hose going to the carb off and push the primer button on the vapourizor and you should hear the gas flow-if not then probably a problem in the vapourizor
I had problems with my c300 that it would run wouldnt run,it turned out to be a bad dist cap but I see you have changed that | |
|
Propane forklift won't start--imagine that .
