|
North Dakota | Tilt compensation will cause an offset on the tractor, WAAS will drift up to 12 inches in an hour and the steering box must be bolted solid to the tractor or it will cause problems. Another thing I see all the time is the implement does not track straight behind the tractor, some by as much as 6 inches. If the air drill is a single disk JD or CNH there is one more boot on the left than the right and needs an 3-4 inch left offset. Also I have seen a few antennas that were not placed exactly in the center of the cab. | |
|
First time out with Ez-steer and the 500
