AgTalk Home
AgTalk Home
Search Forums | Classifieds (155) | Skins | Language
You are logged in as a guest. ( logon | register )

How to tile
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
gpsdude
Posted 7/27/2013 16:26 (#3232515 - in reply to #3232376)
Subject: Re: How to tile


NE South Dakota Clark, SD
You will also need an RTK source. You could unlock your 750 to RTK. I highly recommend a base in the field. CORS may be good enough, but a base in the field is always better. If you go with Intellislope you will need a long DB9 cable and a long coax for the antenna. If you have any more specific questions about tiling , plows or grade control my contact info is in my profile. If you were at the "Field Day" on the 25th , it is not as easy as it looks. Tiling is a lot of work but is worth every drop of sweat. I have set up a chipped 335 with a pull type ZD and can say your chipped 325 will work fine for most laterals, but will need help on anything deep and on bigger pipe. I would recommend a set of saddle tanks up front full of water or 28 would be even better for more traction.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)