The DB9 plugs are wired the same in both the cables that you have. You mean a 2500 GPS antenna? It should plug right into the DB9 on either one and power up. The 726 i mentioned is what your 724-10 plugged into. You should just be able to plug the Integra into the InSight display cable, plug the 2500 into the InSight DB9 and everything will work. UNLESS you are trying to use the OnTrac 2 with the Integra, then you will need to put the Integra display cable in and get the two cables I mentioned about in the other post. What did you have for gps on the insight before?
Edited by agboy 4/22/2011 21:26
|