|
Butterfield, MN | You won't want to go near a GPS enhancer if you have 4.0 SmarTrax software or above. It is a bag of snakes looking for an opening. I haven't done any installations with the GPS enhancer, but they must have stopped selling them for a reason, and I know it was before they came out with the 3D system. The TM1 sensor will be your best bet on this sytem, or else there is a retrofit kit to put the 3D node system in to controll your current valve, as long as you are running your guidance through a Viper Pro, Envizio Pro, or Cruizer. One of them is needed to calibrate the system, since the 3D stuff doesn't have a little control panel. | |
|