|
|
The exception is Pin 18 which is a Master on the Deere setup if you need it.
Do you mean pin 18 out of the RC? My book says that is Section 13.
We feel that this ability to easily "return to original" is a must. It is very reassuring to be able to return to the original setup for a variety of reasons. Sometimes the Fancy Display is being used elsewhere, a certain operator doesn't want to use it and wants the rig the "old way" or the rig gets traded and needs to work for the next owner.
That is nice about how I have it set up, just one connector to plug and unplug.
The only two things I don't like is the timer on the manual button on the GS2, and that I can't use the Raven boom switch box but swath control seems to eliminate the need for turning booms on and off.
The only thing I have not got figured out is say I am coming to a point row and the SC turns off the booms one at a time until the end, when I turn around to head back there is enough pressure to turn the first boom section but when the second section opens up there not enough pressure and the pump stalls. You can set your minimum GPM but that must not apply when sections are turned off.
Any thoughts Mr. Thisius?
Edited by Smoothlander 6/13/2010 17:25
| |
|
JD Rate Controller in Rogator 854 answers
