|
NE Indiana | You can not use the 4001266. That cable is meant to attach to the console cable that attaches to the 440 console so it uses power that the console cable has to power the modules and such. In one of the pictures you it shows that the Raven product cable you have is a -838 which is a multi-section cable. Do you have multiple sections? If you do then you would not need to repin a connection you can just plug Boom 1 into the main on/off valve and then go on with the section valves on the toolbar. If you don't have any section valves you could either plug a connection into the boom on the Liquid Module and go to the main on/off and the rest are just not plugged in or you can repin the Auxiliary plug and run the main on/off as an auxiliary valve. | |
|
Raven Accuflow to Ag Leader?
