Near Intersection of I-35 & I-90 Southern Mn. | I'm really fuzzy on the procedure to "slow down" a 1500. You indicate that it seems to work when attempting to slow it down with the Integra but that the changes don't "stick" and revert back to the originals after you remove it from the Integra and try it with the PF3000.
I'm wondering if there is a extra step where you indicate that you wish these new settings to be "saved" after you have made them. The other poster suggests using a two port cable where the Integra would be connected to Port B but make the changes to Port A which you would be using with the PF3000.
Seems like I ran into a situation where after changing a setting, I was not able to "get back in" with the device since I had "locked the door behind me".
Good Luck.
Edited by tedbear 6/19/2026 06:31
|
Legacy PF3000 not getting gps connection
