|
Southern Illinois | I have a ag leader direct command in a 2010 Hagie sts12. It’s got a in command 1200 (if that matters). Here recently whenever I turn on the end row and I come back into the unsprayed field, my pressure spikes to around 80 psi. Then drops to 60 psi (which is the correct pressure). I’ve played with the settings and it doesn’t seem to affect it. It only does it when the whole boom turns on at the same time, if it’s a point row and one section at a time comes on it works correctly. What do I need to adjust? My own gain is 375, pwm standby is 42. I’ve swapped flow
Meters (had a used spare on the shelf) and still done it. I should also add my standby pressure is around 40 psi when the booms are turned off.
Where it really gets weird is I run a NTB also and it does not do this. I’ve copied the settings from the ntb to the booms and the problem is still there. The flow meters are different but that’s the only thing. I’m at a loss
Thanks | |
|
Ag leader direct command help
