|
WCIL | I felt like it was hit or miss as to whether my implement steering worked good or would decide to wander this spring. I use a 7500 version 2.40p on sf-rtk on the tractor and put a 6000 version 4.60H on sf1 on the planter. Worked ground was the worst, couldn't go over 7.5mph without it wandering. Somedays I'd adjust the advanced settings and get it to drive straighter and then the next day those settings wouldn't help and I'd reset everything to default and start again. I know I've seen that error message but I can't remember if it was this spring or last fall that I saw. All of my displays and receivers are on the latest updates.
Edited to add
I did turn off the implement guidance one day thinking that the tractor would surely drive better on its own and didn't see any improvement so I turned it back on so I would have auto path.
Edited by sserven 5/19/2026 19:07
| |
|
Anyone else having "wandering" issues with Implement Guidence with SF7000's with Version 6.80C?
