|
Southeast MN | I'm running into issues with surestop clutches not fully disengaging when entering my unplanned areas resulting in unplanted rows. Then, if I flip the switch a couple of times the rows are good again.
It's only one row at a time. Not the entire planter.
What could be causing this?
Never has caused the clutch config failures. Always let's me plant. Clutches work fine when I disable the row shutoffs and unhook the 12v power to the clutch module, they arent slipping. Clutches are 2 years old and about 1200 acres on them.
Any ideas?
Edited by DBFarm 5/5/2026 19:27
| |
|
Surestop clutches sticking "on" not letting me plant
