|
| I've been using an Outback Maverix with an AC110 rate controller to run my clutches on my 16 rows.
I have a JD Greenstar rate controller to hook to a G5 display.
I know the polarity is different. I was told I need a special harness from Ag Express to correct the polarity not just switch the 2 pin wires on the clutch.
Ag Express says I just need the 37 pin adapter and switch the 2 pins on each clutch. If that is true, can I just rewire my harness with a 37 pin end?
| |
|
Ag Leader Surestop Clutches to older JD Rate Controller
