|
East Central, Nebraska | i had not until recently seen a single channel spinner spreader module. Obviously 3 channels are very common and have seen 5 channels in ag leader support documents but never a single channel. on the module someone wrote in black marker "insight only". So after hooking the implement up to a tractor with an incommand and trying to set it up i see that there is no option to select a single channel but only 3 or 5. question is, on the single channel is the insight the only device that can utilize the single channel module or were there others? for the fun of it i tried to select a 3 channel and it did not see it when i went to select the configuration. it did fully recognize that it was on the can up in the diagnostics screen but no luck being able to utilize it. just wondering if this was an insight only module?
on a side note i do remember there used to be a clutch control module that was a little different also back in the day. i don't remember the particulars but do somewhat remember a situation like this with it. not a big deal just thought i would ask if anyone remembered the details of this obviously older module. | |
|
Ag Leader Spinner Spreader Module (CH1)
