Jeffersonville, OH | iafarmerboy220 - 5/9/2025 22:53
Thanks Chris, the speedsteer is not working, the can connects for a split second when I touch that button. The Agleader is tied into the x282 on the pillar
If SpeedSteer isn't working, I'm going to bet you have an issue. If you have a decent dealer, they should be able to plug in and see if it's seeing the Wheel Angle sensor, the SASA (Steering Angle Absolute Sensor, which is on the steering shaft) or if they can calibrate the AGCO valve.
If the SASA or Wheel angle are bad, it will shut the whole system down. Both of those communicate directly to the PVED (steering valve) and you have to have all 3 good to get autosteer, or Speedsteer.
Does your Auto 4wd work?
Chris |
Massey Autoguide/ Agleader. No can communication
