|
|
| We recently got a 2021 afs puma 240. Haven't been super happy with the pro 700, and was wondering if it can be replaced with either the 700 plus or the pro 1200. |
|
| |
|
| Yes to both of your questions. The Pro 700+ is a drop-in replacement as long as you are not running a 2008 and older planter, AccuControl (rate and section with Trimble modules) or Electristeer. It will function the same as the Pro700, just a lot faster, a lot better screen, and overall just better. You can put a Pro1200 in as well but it's not a simple drop-in replacement as the Pro700+. It will need some additional harnessing, controller, and Vector Pro GPS receiver so the cost would be greater than just putting in a Pro700+.
If you are running anything ISO currently, I would looking to the Pro700+ as a replacement. It seems to work better than both the Pro700 and Pro1200, even though the Pro1200 is the latest and greatest. |
|
| |
|
NE SoDak | Got any more info on this 700+? Any videos or links?
Sorry to hijack thread but would it work in a 2013 steiger with a 2014 planter?. |
|
| |
|
roaming | caseih9280 - 2/5/2025 09:23
Got any more info on this 700+? Any videos or links?
https://www.caseih.com/en/africamiddleeast/products/precision-techno...
caseih9280 - 2/5/2025 09:23
Sorry to hijack thread but would it work in a 2013 steiger with a 2014 planter?.
yes |
|
| |
|
NE SoDak | What's the cost |
|
| |
|
| caseih9280 - 2/5/2025 13:04
What's the cost
$5500 is what my case dealer quoted. However, case is currently running a trade up option which drops the price considerably. |
|
| |
|
Litchfield, NY | The pro 700 plus can be used in your setup and will run 1200 series planters software or 2000 series planters. Your dealer will need an Est updated to the latest and greatest to have large tractor software to load into 700+ |
|
| |
Caseih Pro 1200
