|
East Central, Nebraska | seems like you have kind of narrowed it down. i have recently been having similar issues and could not figure it out. my situation was almost identical to yours with different hardware, mine is an incommand 1200, 7500 and legacy steer command. my problem seems to me to be that the usb port that the wifi adapter is plugged into is getting worn out despite being secured by the screw properly. this particular display was bought the first year they came out. i can take the adaptor and wiggle it and replicate the issue. if aginiti is staying connected though for you this may not be your issue though i did notice that agfiniti took longer to show up not working than the connection to digifarm did. i was fighting it pretty hard and narrowed my issue down to that.
when yours is doing it check to see under the menu in the top right corner if it is possible to open up the data transfer button in the pulldown. if it is greyed out when you tap the pulldown then it is a wifi/usb issue.
your problem may differ but this is my experience. | |
|
Incommand NTRIP issues
