|
near Mtl, QC | I have a control valve with PTO kick-out function, and I'm not sure on how I must connect the air line. Ok there is 5 connectors on the valve. 1 is the supply (no problem wwith that one) 2 send air to pto (no problem too) 3 send air to pump to lower box (that's ok too) It's the 2 others that I don't know. What is the kick-out lever? If I putit in the UP position, the main lever will retrun to neutral position (if he was in pto function) and there is air going out the 4th connector. So where do I route the air? Also, the pump is equiped with a air shift, so I have plugged one end on the lower box function, but what about the other end? If I put air on the other end, nothing happen.... Hope my story isn't too confuding! | |
|