dabeegmon - 1/29/2024 05:30
Shimmy1 - 1/28/2024 21:31
dabeegmon - 1/28/2024 17:16
.
I'm guessing that the tractor had a 3306 in it - - - its a good engine but not up to putting all the jam out the front end of the crank.
.
Look at the pics again. That tractor has a 903.
The 903 was an ok truck engine but for something where you needed pull down torque - - - they just didn't long term cut it.
Sure lots of 4880’s running around with 903’s. Couldn’t have been that bad.