|
NE Ohio | There is an on/off switch that turns the pump on. Trying to see how I can adjust the pressure to get enough flow for the educator to work. Manual states to set engine RPM at 1500 and switch the Raven to manual and then you have the inc/dec switch to change flow. Since I don't have the Raven and have a trimble system, not sure how to change the flow without putting product to the booms. I tried putting the field IQ in manual and shutting off the boom section toggle switches, but it errored out with no flow. So not sure what I'm doing wrong. | |
|
Educator on Rogator 554 with Trimble CFX750 &Field IQ
