|
Cedar Rapids, Iowa | The FlexPak6 does have Ethernet, it's in the 15 pin I/O port. It uses 4 pins in that port, so an adapter is required to get to a RJ45 jack.
The commands to push correction data to a caster would look something like this:
INTERFACEMODE NCOM1 NOVATEL RTCMV3 OFF
UNLOGALL NCOM1
LOG NCOM1 RTCM1004 ONTIME 1
LOG NCOM1 RTCM1012 ONTIME 1
LOG NCOM1 RTCM1006 ONTIME 10
LOG NCOM1 RTCM1033 ONTIME 10
LOG NCOM1 RTCM1019 ONTIME 120
LOG NCOM1 RTCM1020 ONTIME 120
NTRIPCONFIG NCOM1 SERVER V1 192.168.2.3:2101 LOCAL "" 1234
RTK2GO is a nice solution if you don't want to have to maintain a caster. So what if someone else uses the data. | |
|
Setting up a home base station - SNIP??
