|
Central Iowa | I posted last week about my indicator reading 0.0 when adjusting concave, after learning it needed a calibration I finally tracked down the procedure in the book, did the calibration, no change, I had read that the pot arm should be pointing to the left tire, mine was pointing to the right so I switched it and recalibrated and get err in the display, I decided to try a new pot, after installing it and recalibrating with the arm in both directions I have the same result, with the arm to the left wheel it reads err and with the pot arm it reads 0.0 regardless of concave position.
Any suggestions would be greatly appreciated! | |
|