|
Liberty, IN | I have yet to calibrate it as I just put in the measurements, and checked to see if there was satellite signal/ and could set an A-B line....
Everything seemed to be functioning properly, other than a shimmy in the steering wheel due to the ez-steer motor. Is this because it isnt calibrated? The foam pad is fine, and I was 1.25 inches from the steering wheel when the ez steer was flipped back. Unfortunately with wet conditions I haven't had the ability to calibrate it, and since it is still wet, I figured I'd try and get some direction on what could be wrong if it isn't a calibration issue.
Edited by hoosier_red 3/11/2020 07:50
| |
|
750... switched our 750/ ez-steer from combine to planting tractor...
