northern edge of north central Missouri | Epro with switch pro. With set for 15 gallons per acre and set for auto section control and adequate line pressure, reads 0 gallons applied causing alarm to go off, screen to paint red, and regulator valve to open wide open trying to satisfy the perceived shortage by computer. I replaced flow meter and did continuity test on 3 flow meter wires all the way from new meter to where they enter the switch pro. Can something be wrong inside switch pro or Epro?
If I run on manual it doesn’t see any gallons applied and remains on 0.
It counts up acres covered but doesn’t count down gallons in tank.
Edited by fatan sassy 6/15/2019 18:00
|
Envizio pro 0 rate
