|
| All those lines.... I've pretty much ruled out environmental.. and think I've narrowed it down to equipment input settings. The field was seeded straight left to right, so that's how I started combining it from the bottom up. About 1/4 into the field I switch to harvesting at an angle to see if the variability in yield between passes was because of field conditions or something else. Well... the variability in yield now shifted to the new angle, pass to pass difference. The field looks uniform, the speed is constant, the header is a 630F on a 9760, offsets on both are 0 (which appears to be right on) My physical width is 29.6, Implement width is 29.6 and track spacing is 29.6 In review my question is why does it yield better one direction then the other?
(Apex 10-22-2018 (full).jpg)
(2630 10-22-2018 (full).jpg)
Attachments ---------------- Apex 10-22-2018 (full).jpg (221KB - 100 downloads) 2630 10-22-2018 (full).jpg (285KB - 100 downloads)
| |
|